Solutions

Depending on the threat analysis or client specifications

Flame retardant functional underwear, which can be worn as an alternative first body layer.

We use high performance fibers such as NOMEX® or POLARTEC® for our underwear.  We currently offer various garments for base layer clothing.

Trousers and long sleeve t-shirt as base layer clothing, reinforced in specific zones with high performance fibers to offer cut protection against knives and other sharp edged objects. A sensible addition to personal protection. The simplest solution is a functional shirt with cut resistant sleeves.

In the clothing segment we offer a combined flame retardant and cut protection solution, where the flame retardant segment is partially reinforced with a cut resistant aramid non woven. We currently offer this clothing variant as a mid and base layer garment.

Thin insert, mainly comprised of pressed high strength fiber layers, also called shock absorbers. We offer these either as full surface or partial surface (spine/heart region) solutions. Combined with soft ballistic protection, they reduce the back face signature (trauma) caused by projectiles.

As trauma reduction can only be reduced by stiffening the ballistic insert, we recommend the partial solution, especially in the spinal region. The shock absorber can be used with almost all of our offered soft ballistic solutions.

Soft, flexible protective insert made of several layers of woven or laminated material.  The material used is a synthetic, high strength PE or PA fiber.  The inserts protect against the threats posed by ballistic projectiles as defined in the appropriate standards to which the insert was certified and tested against.

Certification and testing to different standards and client specifications can be performed upon request.

•

Standard solutions ranging from 6.4kg/m² to 4.0kg/m²

•

SK1+ protective solutions are additionally tested against 7.62x25 Tokarev and 9x19 Makarov projectiles.

•

The soft ballistic solutions are available for all BSST vest models in standard sizes, customized sizes or tailored solutions.

 

Threat Level Standard
SK1, SK1+ TR
Class 3, Class 4 VPAM
IIIA NIJ

Inserts comprised of chain mail, steel plates or segmented, hardened aluminium, offering protection against blow and stab weapons as defined in the appropriate standards to which the insert was certified and tested against.

Threat Levels Standard
SK1 ST TR
K1-K4, D1-D4, I1, W1-W5 VPAM KDIW

Certification and testing to different standards and client specifications can be performed upon request.

•

The anti stab solutions are available for all BSST vest models in standard sizes. Customized sizes or tailored solutions upon request.

•

Solutions made of aluminium also offer additional protection against blows and has additionally shown that it also improves protection in the event of vehicle accidents.

•

All solutions are available in combination with soft ballistic inserts or as stand-alone solutions.

 

Hard inserts made of pressed high strength fiber layers, depending on protection level, also in conjunction with ceramic components. These offer protection against the projectiles as defined in the appropriate standards to which the insert was certified and tested against.

Certification and testing to different standards and client specifications can be performed upon request.

•

Several standard sizes for torso protection (front, rear and side) and groin protection.

•

Client specific solutions for other regions, such as throat, neck and extremities upon request.

•

Solutions available in conjunction with soft ballistic or as stand-alone solutions.

 

Threat Levels Standard
SK2 - SK4 TR
Class 6 - Class 13 VPAM
III, IV NIJ